RF Enclosure: IG-235E

  • Dimension:
  • L=135, D=130, H=160 cm

  • Typical RF shielding:
  • 0.1GHz – 1.0GHz > 110dB
    1.0GHz – 3.0GHz > 110dB
    3.0GHz – 6.0GHz > 110dB

  • Up to EHF
  • Very High performance
  • Over The Air

IG-235E RF Shielding Enclosure

IG-235E is the biggest product at the E series.

The IG-235E has been developed for testing large set-ups , UUTs / DUTs and provides high attenuation level.

The chamber design for testing any wireless transmission such as: Wi-Fi, Bluetooth, RFID, 3G, WLAN, GPS and Wimax. It may also be used for cell-site testing, RF resistor testing and two-way radio testing.

Connected or Over-The-Air tests and measurement Shielded chamber.

Typical use cases

  • Fast, reliable EMI/RFI testing and verification, while providing effective shielding of 110dBm minimum attenuation tested as per as
  • MIL-STD-285D up to 6GHz
  • High performance construction of SAE 1020 and copper EMC shielding with ROHs compliant welding and RAL 9010 STD coating.
  • Manual operation with front loading, big handle opened door.
  • Shielding tested under lab conditions with signal generator by spectrum analyzer and conforming antenna. Manufacturer’s C.O.T. and test results included.
  • For large UUT’s / DUT’s
  • Custom-made product adaptable to any application..

Accessories

  • Double Honey-comb vent windows 265X265 mm
  • Exhaust fan
  • SMA / K / or any Adaptors / Filters on IOs panel
  • Filtered terminal 220VAC max 32 Amp
  • AC power supply plug in + cord cable
  • 4 Outlet 120VAC/15A
  • Filtered terminal 50VDC max 20 Amp
  • DC Plug in
  • RF absorbent foam liner
  • Double lip RF barium fingers sealing
  • Grounding Point
  • Dimension: L=135, D=130, H=160 cm
  • Weight: -
  • Material: SAE 1020 and copper EMC
  • Typical RF shielding: 0.1GHz – 1.0GHz > 110dB 1.0GHz – 3.0GHz > 110dB 3.0GHz – 6.0GHz >110dB
  • Line voltage: 50 VDC, max 3 Amp 220 VAC, max 16 Amp
  • Color: RAL 9010
  • Tested on mmW up to 40 GHz

Optional Accessories

  • Anechoic absorber lining for the interior surface
  • Custom IO’s panel with any filtered connectors you may need.
  • Waveguide for optic fibers
  • RF shielded observation honeycomb
  • Ventilation system
  • Additional in-port/out-port systems
  • Extra custom-made requirement